# Monitor vibration monitors centrally and assess events by standard

> Monitor vibration monitors such as Semex EngCon Menhir centrally and assess events according to DIN 4150, ÖNORM S 9020, VSS 40312 and other standards.

With SEDRIX you bring the measurement data of all your vibration monitors together in one consistent place and analyze it there – without installing vendor-specific analysis software.

- Solutions: Vibration measurements
- URL: https://www.sedrix.com/en/solutions/vibration-measurements/
- Flyer as PDF: https://www.sedrix.com/downloads/sedrix-vibration-measurements-de.pdf (German only)

## Your system – your devices

We currently support the following devices:

- Semex EngCon Menhir
- Syscom MR3000

A strong team: integrate your Semex EngCon Menhir seamlessly into SEDRIX. Using other devices? No problem, we add further devices on request. Just get in touch!

## Monitoring – everything in view

SEDRIX keeps your entire fleet of devices in view. See at any time and from anywhere which project a device is in, whether it is online and whether it is sending data. You can reach your Menhir's web interface from anywhere, no VPN required.

If a device fails, an easy-to-use assignment concept makes replacing it quick and smooth.

_[Connection status of the measuring devices in the overview]_

## Assessment by standard

Organizing data in measuring points makes analysis simple. SEDRIX assesses vibration events according to these national standards:

- DIN 4150-2
- DIN 4150-3
- ÖNORM S 9020
- VSS 40312
- F-Circulaire 86
- BS 7385-2
- UNE 22381

For special limit requirements, you can also define frequency-dependent limit functions.

Have yourself, your staff or your clients notified or alerted automatically when vibration events exceed the limits of a standard. You can also show the standards in the graphical analysis, the vibration statistics, to compare them with the measured values.

_[Vibration statistics with a national standard shown as a yellow line]_

## Analysis – all information at any time

SEDRIX offers many ways to analyze, process and visualize your measurement data.

### Event table

The event table lists all vibration events that have occurred and can be configured and sorted freely. Visual markers show at once whether a measurement lies outside the selected standard.

_[Overview of vibration events in the event table]_

### Interval data

SEDRIX supports all interval data the devices produce, for example:

- Peak values
- Vector sum
- KB<sub>FTi</sub>
- VDV, including totals over specific periods
- Dominant frequencies
- Wm-weighted vibration acceleration
- Secondary airborne noise

_[Interval data]_

### Analysis of vibration events

The following analyses are available for vibration events:

- Displacement
- Velocity
- Acceleration
- Wm-weighted vibration acceleration
- Vector sum
- Amplitude spectrum
- Third-octave band, average and maximum
- Weighted vibration strength KB<sub>F</sub>
- Secondary airborne noise with display of the slope steepness
- Vibration dose value (VDV)

_[Visualization of vibration data]_

_[Choice of available analyses]_

To correct measurement data, you can pre-process the data of a vibration event with high-pass or low-pass filters. For a clearer picture, add explanatory comments to events or hide them completely.

## Reports and export – your data in any form

Create and configure report templates to suit your requirements. On request, the system generates reports on its own at freely defined intervals, for example every week.

SEDRIX is the central hub for all your data: it collects, organizes and processes it. But it is no dead end – export any data you need in CSV format at any time.

## Blasting extension (optional add-on)

The optional blasting extension records and automatically assesses the vibration events belonging to a blast. It also makes creating blast reports easy.

_[Overview of a blast event]_

## Customizing

Thanks to a flexible and extensible architecture, we implement special requirements with little effort and integrate them seamlessly into SEDRIX. Our agile development team looks forward to hearing about your challenge and finding a tailor-made solution.

## About us

SEDRIX is developed by Remolution Software GmbH. Since its foundation in 1992, Remolution has been developing high-quality software for managing, analyzing and visualizing geotechnical measurement data.

Since the project started in 2015, SEDRIX has benefited from more than 25 years of experience in software development and construction monitoring.

## We look forward to hearing from you!

- Remolution Software GmbH, Rosenstr. 76, 76287 Rheinstetten
- webinfo@remolution-software.com, +49 721 603201-0
