2016 – 2017 – 2018 – 2019 – 2020 – 2021 – 2022 – 2023 – Current
Version 6.1.8
17.12.2025
New features
- Berichte: Es ist nun möglich, alle Berichte eines Ordner auf einmal herunterzuladen.
- Erschütterungsmessungen: Bei der DIN4150-2 Tabelle kann nun ausgewählt werden ob nur Tag- oder nur Nachtzeitraum oder beides angezeigt werden.
- Erschütterungsmessungen: Bei Auswertung nach DIN 4150-2 gibt es nun auch eine Option für kurzzeitige Erschütterungen.
Changed functions
- Erschütterungsmessungen: Die DIN4150-2 Tabelle wurde nochmals überarbeitet und ist nun übersichtlicher gestaltet.
Fixed bugs
- Erschütterungsmessungen: In Berichten traten beim Erzeugen von Event-Diagrammen unter Umständen Fehler auf.
- Erschütterungsmessungen: Bei Events wurden ab einer bestimmten Zoomstufe die Zeitstempel nicht korrekt angezeigt.
- Auswertungen: Bei Verwenden von ‘ß’ oder anderen Sonderzeichen in Texten eines Diagramms wurde das ganze Diagramm nicht mehr gezeichnet.
Version 6.1.7
10.12.2025
New features
- Erschütterungsmessungen: Es können nun bis zu 15 Kanäle in einem Diagramm angezeigt werden.
Changed functions
- Diagramme: Die Selektion von Peaks ist nun deutlich einfacher.
- Erschütterungsmessungen: Bei Beurteilung von Erschütterungs-Events nach DIN 4150-2 wird nun wieder der Ao-Grenzwert benutzt. Dies macht insbesondere bei Beurteilung von seltenen Erschütterungen Sinn, wo die Norm lediglich der Vergleich von KBFMax mit Ao zulässt.
Fixed bugs
- Einfärbung der Werte in Sprengtabellen funktionierte nicht immer korrekt
- Erschütterungsmessungen: Beim Zoomen in Diagrammen von Erschütterungs-Events gab es Probleme, so dass das Signal nicht immer komplett angezeigt wurde.
- Die zuletzt ausgewählte Paging-Info bei Event-Tabellen bleibt nun erhalten.
Version 6.1.6
28.11.2025
New features
- Exportaufträge können nun erneut gestartet werden und gleichermaßen auch der Upload erneut angestoßen werden.
Changed functions
- Benutzergruppen-Benachrichtigungen werden nun schneller verarbeitet. Das gilt sowohl für manuelle Benachrichtigung als auch für Benachrichtigungen über den Menhir.
- Erschütterungsmessungen: Die Richtwerte der ÖNORM S 9020 wurden an den finalen Stand der Norm angepasst.
- Erschütterungsmessungen: Die Darstellung der DIN 4150-2 Tabelle wurde überarbeitet.
- Erschütterungsmessungen: Beim Import von Events wird nun geprüft ob die Anzahl Samples zur Dauer und Abtastrate passt. Bei signifikanter Abweichung wird ein ungültiges Event automatisch ausgeblendet und mit einem Kommentar versehen.
Fixed bugs
- Erschütterungsmessungen: Grenzwertlinien in der Auswertung Erschütterungsstatistik wurden insbesondere bei Sprüngen nicht korrekt angezeigt.
Version 6.1.5
13.11.2025
New features
- Tabelle für Auswertung nach DIN 4150-2
Changed functions
- Erschütterungsmessungen: Bei Beurteilung von Erschütterungs-Events nach DIN 4150-2 wird nun der Au-Grenzwert benutzt und nicht mehr der Ao-Grenzwert. Nur bei Unterschreiten des Au-Grenzwerts kann sicher davon gesprochen werden, dass für diesen Zeitraum, die Anforderungen der Norm eingehalten wurden, wohingegen eine Unterschreiten von Ao nicht unbedingt bedeutet, dass die Anforderungen eingehalten wurden.
- Erschütterungsmessungen: Bei der Erschütterungsstatistik von Events werden die Grenzwerte Au/Ao nicht mehr als Option zum Einblenden angeboten.
- Horizontaler Scroll-Balken in Zuordnungsansicht hinzugefügt.
Fixed bugs
- Erschütterungsmessungen: Wenn eine Event-Tabelle angezeigt werden sollte, aber der Messstelle keine Events zugewiesen waren, wurde ein unverständlicher Fehler angezeigt.
- Das automatische neu laden einer Seite aktualisierte die Seite nicht vollständig.
Version 6.1.4
07.10.2025
New features
- Erschütterungsmessungen: Unterstützung von VDV-Profildaten vom Menhir
Changed functions
- Inklinometermessungen: “Verschlüsselte Zugangsdaten für die direkte Eingabe in der App” wurde umbenannt zu “Zugangsschlüssel”. Die Benennung ist somit konsistent zur Benennung in der GIA-App mit der Inklinometermessungen mit Sedrix synchronisiert werden können.
Fixed bugs
- Erschütterungsmessungen: Ein interner Fehler verhinderte das Speichern von Erschütterungsmessstellen, demzufolge konnten Messstellen nicht bearbeitet oder gelöscht werden, das Ausblenden von Events in Hintergrunddaten schlug fehl und beim neu Anlegen von Messstellen fehlten die Standardauswertungen.
Version 6.1.3
30.09.2025
Changed functions
- The menu has been revised and the user’s current preferences regarding display are now better taken into account.
- Time-value measurements: Importing World Sensing data sources has been revised, in particularly concerning the names of imported channels.
- User list: The “Project” column has been renamed “Last used project”.
Fixed bugs
- Errors that occurred when retrieving email settings have been corrected.
- Seismic measurements: Errors that occurred when hiding profile data have been corrected – in the event that no data had been transmitted, but the channels were already created.
Version 6.1.2
25.09.2025
New features
- Time-value measurements: “Messages” files from MCC measuring stations are now also imported and displayed in the log.
- Web API: It is now possible to retrieve assignments.
- Seismic measurements: When a Menhir seismic measurement device sends configuration data, this data is now also evaluated. This means that channels can be created immediately within SEDRIX and not only when data is imported.
- Time-value measurements: A further WorldSensing format is now supported for importing PICO nodes.
Changed functions
- Seismic measurements: It is now possible to give to seismic measurement devices the same name. Only the respective series number must be unique.
- Seismic measurements: Alert definitions can be defined to be able to color-code value ranges in interval data diagrams. Active alerting does however not take place!
- Time-value measurements: WorldSensing format for vibrating wire measurements is now more tolerant regarding column names.
Fixed bugs
- Saving email settings no longer functioned correctly.
Version 6.1.1
15.08.2025
New features
- The length of time that a report is stored can now be set.
Changed functions
- Inclinometer measurements: Sync information for automatic syncing with the Glötzl inclinometer app is now also displayed under “Manage account”.
Fixed bugs
- When there were a large number of data gaps in diagrams, it was possible that no diagram was generated at all for long time periods in a report.
Version 6.1.0
25.07.2025
New features
- You can now deactivate notifications via email, SMS or telephone call using a switch in the global settings.
- The Web API has been extended.
- Test phase: Function block for determining the average relative rate of change.
Fixed bugs
- When exporting data via the web API in json format, the units were occasionally not taken into account correctly.
Version 6.0.5
09.07.2025
New features
- Time-value-measurements: A further WorldSensing format is supported for the import of vibrating wire measurements.
Fixed bugs
- In the input elements diagram, the timestamp was not correctly displayed in the tooltips.
- Blasting operations: When deciding whether a device was online at a certain time point or not, the incorrect type of assignments was occasionally used.
- When displaying milliseconds in diagrams that used time zones with am/pm, the milliseconds were displayed in the wrong place.
Version 6.0.4
19.06.2025
New features
- Reports: Reports will now be automatically deleted after a certain retention time. If you would like to keep a specific report permanently, this can be set for each individual report.
Pre-existing reports will not be automatically deleted and are kept permanently.
Changed functions
- Blasting operations: The response times for displaying blasting operations have been improved.
- Seismic measurements: Importing 1/3-octave band interval data is now more stable. When altering the sampling rate in a Menhir measurement device, the number of 1/3 octave bands was also altered. This led to errors during the import. This version allows for the number of 1/3 octave bands to be automatically adjusted during import.
- Seismic measurements: All available evaluations have been added to report templates.
- Seismic measurements: Further types of interval data are now supported for Menhir imports.
- Seismic measurements: For diagrams displaying interval data, the option to select the unit has been added where necessary. Previously, e.g. in a diagram showing peaks, values with different units (velocity and acceleration) were occasionally incorrectly combined.
- Reports: The resolution of diagrams within reports has been doubled.
Fixed bugs
- Seismic measurements: Exporting a created event failed.
- Seismic measurements: Exporting an event table using an export order failed.
Version 6.0.3
14.05.2025
New features
- The cache for data exports can now also be stored on S3 Storage as well as being saved to the file system. S3 Storage has the advantage that it is not limited and can be scaled as needed. Saving the cache on S3 Storage is now standard.
Changed functions
- Seismic measurements: The row is now also displayed for DIN 4150-3 in the event table.
- Seismic measurements: Protected events are now displayed as such in the event table.
Fixed bugs
- Seismic measurements: When reading seismic data, there was occasionally an error when importing a Menhir device in certain configurations.
- Seismic measurements: When exporting the export table, any set filter was not taken into account.
Version 6.0.2
08.05.2025
New features
- Seismic measurements: Individual events can be marked as “Protected”. This function helps prepare data to be automatically deleted. This flag means that individual events can be removed from the automatic deletion.
- Reports: When selecting the report period, a time range can also be added when selecting “Today” and “Yesterday”.
Changed functions
- Long error messages are no longer shown in the legend of position-value diagrams. A note which reads “Measurement not complete” is now shown to indicate that the calculations could not be completed.
Fixed bugs
- Evaluations: There were still problems when displaying position-value diagrams using certain parameters within the context of the new chart library.
- Evaluations: The font type when exporting a diagram was not correct.
- Evaluations: An unsuited downsampling algorithm was used for value-value diagrams with many data points. This meant that not all of the points were displayed.
- Seismic measurements: When exporting an event table, the events filter setting was not taken into account.
- Seismic measurements: Exporting an event table using an export order led to an error.
- Seismic measurements: Exporting an event composed of existing events led to an error.
Version 6.0.1
25.04.2025
New features
- The new import format of “Senceive CSV” has been implemented.
- Seismic measurements: You can now also choose to display the trigger type can now be displayed in the event table.
Changed functions
- When using function blocks to evaluate inclinometer chains, the number of chain links is no longer set. It can now be extended as needed.
- The blasting list has been revised. Misleading line breaks have been removed and unnecessary information is no longer displayed when viewing the list on small screens.
- Diagrams: Checkmarks are now also displayed on primary and secondary value axes.
Fixed bugs
- API: The “api/v1/measuringpoints” route was accidently removed in version 5.5.3.
- Seismic measurements: Importing a seismic event occasionally failed if an ongoing event was also being recorded.
Version 5.5.5
25.04.2025
Fixed bugs
- API: The “api/v1/measuringpoints” route was accidently removed in version 5.5.3.
- Seismic measurements: Importing a seismic event occasionally failed if an ongoing event was also being recorded.
Version 6.0.0
09.04.2025
New features
- The library used for displaying diagrams has been replaced by a more modern version. The diagrams used online, in reports and for export now look almost identical.
- If there are many logbook entries, events, or blasts in a diagram, they are now grouped together once a certain number is reached. This means that the diagram remains clear and easy to read.
- Alert definitions can now be duplicated across all projects.
- Within user properties, you can now label individual users as contact persons for maintenance or billing. A planned feature is that these users will be automatically informed via email e.g. before system maintenance.
- Seismic measurements: In this version, you can now create heatmaps to visually represent octave band data. Please note that this function is still in the testing phase.
- Visualization: The measured value label of channels within user-defined visualizations now display the alert status.
- Import von Daten für World Sensing Messgeräte
Changed functions
- Diagram options are now shown on the top right. As such, they blend in better with the overall view.
- If now data is available within a diagram, only a warning will now be displayed. Particularly in the case of seismic statistics, this warning was more like an error previously.
- Inclinometer measurements: Importing .rpp data from Interfels is now more stable. Both a point/period and a comma can be used as decimal separators.
Fixed bugs
- Various diagrams and tables were not shown in measuring points that contained at least two query marks in their name.
- Various upload dialogs were lost
Version 5.5.4
10.04.2025
Fixed bugs
- Menhir measurement device: Stability improvements for setting up a connection to the Menhir remote web interface.
- Bug fix for creating artificial events.
Version 5.5.3
03.04.2025
New features
- Seismic measurements: A new option has been added to the web API for calling up seismic measurements.
api/v3/semeasuringpoints/:measuringPointId/channels
This can be used to call up interval data from a seismic measuring point. Use the “selection” parameter to select either various types of interval data or all available data within the measuring point. Along with csv, you can now also use json as an export format.
You will find the description of the web API here: https://api.smartdata.center/ - The web API has been expanded, making it possible to call up data from any measuring point.
api/v3/application/:application/measuringpoints/:measuringPointId/channels
In each case, data from all channels within a measuring point will be exported.
Die Beschreibung zur Web-API befindet sich hier: https://api.smartdata.center/
Version 5.5.2
25.03.2025
Fixed bugs
- Menhir measurement device: Using “Common trigger” via Sedrix only functioned for one project at a time.
Version 5.5.1
04.03.2025
New features
- It is now possible to edit multiple assignments at once, if they have the same start date. You can now also change the start date and (optionally) the end date.
- Renaming multiple assignments in a channel at once is now possible. Previously each assignment had to be renamed individually.
- Deleting all channel or measuring point assignments at once is now possible. Previously each assignment had to be deleted individually.
- There is now a view for super-admins which allows them to manage the cache for devices with remote access to its web interface.
- Additional views have been introduced in order to view usage statistics that provide information about used storage space, traffic etc. These statistics are available per device, per project and for entire instances. Displaying and evaluating these statistics is currently still experimental and may still contain errors.
Changed functions
- The view in which you create and edit assignments has been revised and standardized for all measuring point types. Time gaps within the assignments are now easier to recognize and the view is overall more compact and clearer.
Fixed bugs
If several channels were initially selected for an assignment and then individual channels were deselected, the deselected channels were still assigned. This was the case for all types of measuring points.
Version 5.5.0
20.09.2024
New features
- Inclinometer measurements: Support for syncing with the Glötzl Inclinometer app.
Changed functions
Fixed bugs
Version 5.4.19
27.01.2025
New features
- Vibration measurements: It was possible that an Excel export of blasting operations was incomplete, if the “Any” type of blasting operation was selected.
- Vibration measurements: Activating the frequence filter in a vibration event led to an error.
Version 5.4.18
22.01.2025
New features
- Automatic export: If the upload of export tasks fails, the upload will be automatically repeated after a certain elapsed time.
Version 5.4.17
21.01.2025
New features
- Further map providers are available for map visualizations.
- The web API for creating logbook entries has been expanded (see https://api.smartdata.center). Previously only logbook entries for a folder could be created via web API. Now logbook entries for projects and measuring points can be added.
Changed functions
- The list of alert definitions has been revised again. Now only the relevant user groups being used for notifications are displayed.
Fixed bugs
- Errors have been fixed that concerned the rights for users without an admin role: editing evaluation views and deleting assignments failed although the rights were in place.
- Excel exports of blasting operations failed.
- The export of 1/3 octave band channels was always empty.
Version 5.4.16
13.01.2025
Changed functions
- The way that the alert definitions list is displayed has been revised.
Fixed bugs
- Vibration measurements: An error has been fixed that affected the display of blasting operations in interval data graphs.
Version 5.4.15
08.01.2025
New features
- General time-value measurements: When duplicating measuring points, the channel data sources can now also be edited.
Changed functions
- Vibration measurements: User-defined threshold values were limited to 0.01 mm/s. This limit has now been removed and smaller values can also be used in the formula.
Fixed bugs
- Vibration measurements: An error message was shown for interval data graphs if no assignment to events existed in the measuring point.
